ISO Approved and Quality Oriented Stainless Steel Pipes & Tubes Manufacturer in India

India’s most Recognized, Trustworthy and Premium quality Manufacturers, Stockist, Exporters, and Global Suppliers of Steel Pipes & Tubes as per the ANSI / ASME A13.1, MSS SP-79 Standards in all Dimensions, Materials, Grades, and Sizes.

We have a huge inventory of odd sizes & hard to find ASME/ANSI A13.1 Pipe and Tube also available in Duplex Steel, Carbon Steel, Alloy Steel, Hastelloy, Monel, Inconel, Titanium, Super Duplex, Incoloy, Alloy 20, 254 SMO, Copper Nickel, High & Low Temperature Steel, Mild Steel offering at market leading prices from Mumbai, India.

Stainless Steel Pipes & Tubes Specifications

Duplex and Super Duplex Steel Pipes Tubes Specifications

Carbon Steel Pipes and Tubes Specifications

Alloy Steel Pipes and Tubes Specifications

Nickel Alloy Pipes and Tubes Specifications

Copper Alloy Pipes and Tubes Specifications

Hastelloy Pipes and Tubes Specifications

Inconel Pipes and Tubes Specifications

Incoloy Pipes and Tubes Specifications

Monel Pipes and Tubes Specifications

Titanium Pipes and Tubes Specifications

Tantalum Pipes and Tubes Specifications

A Steel Pipes is a round tubular to distribute fluids, and gases, designated by nominal pipe size (NPS) that represent a rough indication of the pipes conveyance capacity. Pipe is a hollow section with round cross section for the conveyance of products. The products include fluids, gas, pellets, powders. The foremost important dimensions for a pipe is the outer diameter (OD) alongside the wall thickness (WT). OD minus 2 times WT (SCHEDULE) determine the within diameter (ID) of a pipe, which determines the liquid capacity of the pipe.

Pipes are normally want to transport gasses or liquids making it is important to understand the capacity. Knowing what quantity can flow through the pipe is essential. The circular shape of the Steel pipe make it efficient when handling pressure from the liquid flowing through.

A Tube is a round, rectangular, squared or oval hollow section measured by outside diameter (OD) and wall thickness (WT), expressed in inches or millimeters. The Tube refers to round, square, rectangular, and oval hollow sections that are used for pressure equipment, for mechanical applications, and for instrumentation systems. Tubes are indicated with outer diameter and wall thickness, in inches or in millimeters.

Tubing is used in structural applications therefore the outside diameter becomes an important dimension. Tubes are often put into applications like medical devices that need precise outside diameters. The surface diameter is very important since it’ll indicate what quantity it can hold as a stability factor.

Pipe and Tube Types

NOTE: Price may vary according to the Market Standard, Total Quantity Ordered and Type of Material. Contact Us for Further Queries.

Seamless Pipes & Tubes

Seamless Pipe as the name suggests is a pipe without a seam or a weld-joint in contrast to Seam pipe. During a Seam pipe, the seam or the weld-joint is the weaker a part of the pipe limiting the strength of the pipe to the strength of the weld-joint. Whereas the seamless pipe doesn’t have any such joint and thus has uniform structure & strength everywhere on the pipe body. Seamless Pipe can withstand higher pressure, higher mechanical stress & corrosive atmospheres and find wide application in Oil & Gas, Refinery, Petrochemical, Chemical, Fertilizer applications.

A Seamless Tube is a tube that doesn’t have any welding seam. The seamless tube will ideally be a solid metal tube with each end connected to a different tube without having any welding joint. These tubes have threads either at one end or at both ends and might be threaded to the top of another hollow tube. The presence of any seamless tube acts as a liability, however, if the tube is seamless, it tends to be solid and overcome various industrial forces and pressures while operational.

Welded Pipes & Tubes

Welded Pipe is one pipe the surface has the steel pipe joint, Which is used the steel belt or plate material through the bending deformation into round, square then welded into shapes. Welded Pipe for conveying water, sewage, gas, air, heating, steam, and other low pressure fluids.

A Welded Tube is produced through roll forming strips or sheets of chrome steel into a tube shape then welding the seam longitudinally. Welded tubing are often accomplished either by hot forming and cold forming processes. Of the 2, cold forming leads to smoother finishes and tighter tolerances. However, each method creates a durable, strong, steel tube that resists corrosion. The welded tube also can be drawn almost like seamless tubing to supply a finer weld seam with better surface finishes and tighter tolerances.

ERW Pipes

ERW Pipes are manufactured by cold forming of Steel Coil into a round cylindrical shapes. ERW Pipe have a Welded Joints in its cross sections. Within the initial times it had been through with the low frequency. Current to heat the sides. The low frequency process changed to high frequency. Current to supply a better quality weld. ERW Pipe have various applications like fencing, scaffolding, Line Pipe. ERW Steel Pipes are available in various diameters, thickness, finish and grade.

Electric Resistance Welded (ERW) IS:1239 steel pipes / tubes during a size range of 1/2 inch (ca. 5 cm) N.B. to 6 inch (ca. 15 cm) N.B. within the Light, Medium and Heavy classes. The nomenclature ERW refers to a particular sort of welding process that involves both spot and seam welding. Seam welding is usually used during the manufacturing of round, square, and rectangular steel tubing. The material utilized in the manufacturing process is usually SAE 1010.

What is the difference between Pipes and Tubes?

Steel Pipe & Tube Dimensions

ASTM standards for Steel Pipes

ASTM standards for Steel Tubes

Top Nations We Export and Supply Steel Pipes & Tubes

---

Steel Pipes & Tubes Applications